Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sink Faucets suppliers
<p>Bronze sink faucet<br>Item no.:00285<br>The model of bronze sink faucet is newly designed with affluent lines. The shower head is light and handy, as complete part with the bronze sink faucet. The handling diverter is easy to control, with one button for two options of pillared water flow and gunned water flow. The aerator inside is making full of bubbles with less noise, while the water flow is focusing in the centre and very soft. The shower head is easy to complete a smooth work of pulling out and returning back. There are two options of pulling out flexible hoses length, 150cm and 200cm. The flexible hoses could be enable the customer reach the wherever position of kitchen, for daily cleaning work in the kitchen.<br>This bronze sink faucet’s main body is applied with high quality brass material, with completely new 9 polishing units. The cylinder surface of the bronze sink faucet is strictly according to the standard for a better surface appearance. The surface treatment is also following the international plating process regulations. The pre-treatment cleaning process by high quality cleanser is essential before the chrome plated process. The nickel should be plated twice by 8μm on the surface, while the chrome should be done by 0.3~0.5μm, totally in two layers of plating treatment. It could insist on the CASS test by 32 hours. It could bear the oil, corrosion, water logging and is wear proof.<br>The acid-resistance testing was done by high temperature with the PH 3, while it is as well as before during 4 hours testing. It is certified that the surface treatment is workable.<br>The main structure of the bronze sink mixer is strictly following the drawings, with the fine machining process, which is enable all the parts work well together. The water test and air testing is done for 100% quantity of each order. The testing process was professional testing machine, combining the water test and the air test. The shut- off pressure is 1.2Mpa, while the turning-on pressure is 0.9Mpa. After fixing the aerator and maintaining the pressure for 60 seconds at 0.6MPa, the bronze sink tap could pass by air test according to the international standards.&nbsp; &nbsp; Sink Faucets suppliers<br>website:<br></p>

Forum Jump:

Users browsing this thread: 2 Guest(s)